Views: 138 Author: Site Editor Publish Time: 2020-06-13 Origin: Site
To provide better service for small grains producers and custom farmers, John Deere has rolled out the latest version of his seeding machine---C650 Air Cart, which has two configurations available: tow-behind configuration and tow-between configuration. Besides, it has three main characteristics: 650-bu. capacity, tires of high flotation and a fill rate of up to 100 bu. per minute.
Taking advantage of modern science and technologies, John Deere has made C650 Air Cart a smart cart. He used ActiveCal, an on-demand calibration feature to design cart-side displays for filling and calibration and added a wiring and made five camera locations possible. With the help of SectionCommand technology, the C650 Air Cart can reduce the overlaps and skips of seed and fertilizer application to the minimum. AirPower 2 technology offer dual fans for seed and fertilizer. This cart is perfect for small grains producers and custom farmers who want an air cart of more than 550-bu capacity.
People who need a seeding machine will surely need a tractor to carry the goods and equipment needed in the field, but as we all know, the tractor chassis is easy to break. So while driving, you must pay attention to tractor chassis fatigue, never “overwork” your tractor. But if your original one is already broken and beyond reparation, there are a lot tractor trailer chassis for sale. Remember to be careful when choosing tractor chassis types, tractor chassis material and tractor chassis number.
Before starting the seeding machine, oil must be added to joints to ensure that the running parts are fully lubricated. Missing or damaged parts should be replenished, replaced and repaired in time. Be careful not to apply oil to the gears and chains to prevent unnecessary wear and tear .
The working length and the number of each row of seeding wheels should remain the same. Make sure the broadcast volume adjustment mechanism is flexible, and there is no slipping.
Before, during and after each shift, the soil in all parts of the seeding machine must be cleaned up, especially the dirt and oil on the transmission belt.
After the end of each shift, the remaining fertilizer in the fertilizer box should be cleaned to prevent the fertilizer from corroding the fertilizer box and the fertilizer discharge parts. Check whether the seeding shaft and fertilizer shaft rotate flexibly.
After each shift, the seeding machine should be parked in a dry shed with a roof. When parking in the open, the fertilizer box should be tightly covered.
These tips must be kept in mind if you want to increase the service life of the seeding machine. After reading this article, I hope you will learn more about John Deere and His C650 Air Cart and also get some tips of maintaining your precious seeding machine.